Search results

ok its still not right i pulled carb checked throttle cable at carb checked intake boot all were good added inline fuel filter and still doing the same thing my only guess would be carb at this point anyone have any ideas thanks again

how can it be the idle screw i never touched it it was idleing and running perfect last week sat for a few days than started acting up

hey guys i have a 2002 a friend of mine rebuilt the carb for me last week it was running perfect. idleing fine running fine i tried to start it over the weekend and it would not start. shot sum starting fluid in fired right up but is screaming. throttle cable is fine not stuck if i throittle up...

thanks duneracerweston ot was the clutch cable all good now Thanks again guys

the manual says 6 lbs of torque i used a old needle torque wrench so its around 6-8lbs of torque i havent messed with the cable but i did put in a new motion pro cable as well. any ideas does anyone know the position of the metal push pin that engages the clutch thanks

thought i had it lined up properly put everything back together , clutch pulles nice but as soon as i put it in reverse it is in gear without the clutch released. also tryed forward gear and it jumps and stalls, everything was working before the clutch so i know the problem is somewhere in the...

i just took everything apart again clutch is fine andinstalledcorrectly . what i need to know is on the inside of the cover plate the round metal thing that comes in and out to release the clutch is that supposed to be flush, recessed, or sticking out, i dont know that thing is supposed to be in...

the clutch is not working properly it is not gearcase, the clutch is engaging without the clutch being let out in forward and reverse when in forward it will stall

hey fellas finally got around to finishing my 2002 warrior had carb issues neddle jet was froze and pilot was clogged. Anyway for sum reason when i put bike in reverse it automatically moves without releasing the clutch, i know the clutch needs to be readjusted just not sure how. it is a...

hey guys just finished new top end running wiseco .20 over k&n drop in filter no lid on cover and fmf exhaust, i jetted carb using 148 main and dropped pilot to the 4th notch i have cleaned the carb thoroughly a couple times but it will not stay running unless choked air is backed off 2 1/2...

hey guys having problems with 2002 warrior just put new piston and rings and the guy that did it i don;t think he put new valve seals in everything is running i had sum issues with carb i jetted it and cleaned it well, the problem is it still smoking, white smoke, just found out my intake boot...

sweet thanks guys i'll post some pics soon

sorry i read the sticky on jetting, my question is should i go ahead and buy the fmf jet kit thats about $50-$55 bucks or should i just replace the main jet, i see that evrything stays stock except the main. i live in maryland so no altitude problems i would hate to spend money if all i need to...

thanks for all the help drift king was right its a cap or something that covers the lead end of cable i finally got it out with a hammer screw dricer and pliers, thanks again for the help

cool thanks i assume the how 2 are in the stickies, also u would think they did jett it but they did not and it killed the rings i just did the ,20 over piston i want to make sure it doesnt happen again.

yeh i have changed quite a few cables before but for some reason it will not come out, it seams there is some type of collar or somethong that is around the end piece that slides in the lever basically it is stuck i even tried a screw driver and a punch but it will not come out

whats up fellas new on here, having a hard time getting clutch cable out of the clutch lever there is some type of metal collar or something that will not allow it to come out i even tried prying it with a flat head, am i missing something or do i have to buy a new lever. trying to put motion...

Whats up fellas been riding dirt bikes, quads and 3 wheelers since a kid, still ride street bikes and just got back into dirt again with my son he has a yamaha moto 4 80 cc and i picked up a 2002 warrior getting ready to throw new piston in and pretty much cleaned everything up, the only mods...