Colt45
Well-Known Member
When taking the cam out how do you take the pins out without a slide hammer?
Last edited:
Also I have to replace a 6205 NSK bearing but there's letters at the end of 6205 with the ones I'm seeing online but there all the same dimensions do those letters mean anything?When taking the cam out how do you take the rocker pins out?
No like you know the pins that are threaded in the inside that people pull out to take the cam out I don't know how to pull them out. Do you even have to pull them out?Are you saying you're having trouble pulling the cam out?
YesThere aren't any pins to pull the cam. Do you mean the rockers?
I was thinking if I get a threaded rod then thread it into the pin and put a deep socket through the rod and a nut and washer on top of the socket and tighten the nut against the socket while holding the top of the bolt with vice grips do you think that will work?There aren't any pins to pull the cam. Do you mean the rockers?
OK.Worth a try. Sometimes they just seize and will never come out.