Camshaft from duncan racing? www.duncanracing.com

glass11racn · Jan 10, 2006

Anyone used their cams before? here is the specs.

X1 Grind Camshaft
Part #: MC-3350-X1B (Billet), MC-3350-X1H (Hardfaced)
Specifications: Midrange-Top End Cam, Lift: .450", Duration 276
Thanks Chip

whitebros87 · Jan 10, 2006

Seems like it could work well.

glass11racn · Jan 11, 2006

bump it up

yeoldetymewarrior8 · Jan 11, 2006

seems like that ***** gonna have powerband with that much duration

xj4m3 · Jan 13, 2006

I have the X-1 billet cam in my warrior. I bought it off of ebay for about 120$. It pulls like no other from about 1/4 throttle on up but below that it killed my lowend. I can live with the lowend though because i got a huge boost in my topend. It seems to rev higher and faster than before and it doesnt have that flat spot in the topend that the warriors are notorious for. I would definatly reccomend it from what ive seen but its quite pricey i believe.

baja226sport · Jan 20, 2006

Sounds like that cam would like to rev alot!!! Maybe to much for trail riding. Don't know what kind of riding you do though.

glass11racn · Jan 20, 2006

I do a lot of trail riding and usually on it pretty hard. Thanks for your input Chip

xj4m3 · Jan 22, 2006

If you do slow riding in the woods or something, your definatly going to need to gear down because it was quite hard on the low end. Anything above a 1/4 throttle though and you should be fine.