Custom case savers

[87warrior917]

Better to kill 2 birds with 1 stone

 

[ryder133]

Better to kill 2 birds with 1 stone

Now I'am thinking 400cc or 460cc

400cc is $325

460cc is $700

So its a big price difference but anything for my Warrior :tup:

 

[duneracerweston]

Had a buddy bust a chain with his, pulled 2 links in half, didn't hurt a thing! Casesaver looked like New.

You should've got one before you busted it but there should be no problem putting it back together and put a case saver on it!

 

[ryder133]

Had a buddy bust a chain with his, pulled 2 links in half, didn't hurt a thing! Casesaver looked like New.

You should've got one before you busted it but there should be no problem putting it back together and put a case saver on it!

I noticed that where the cover plate bolts up, One of the holes goes all the way inside the case so when I start it up, It shoots exhaust out the whole and runs rough. I don't want to have any other troubles with it so if I spend an extra $200 on my build, I should be able to get a MINTy fresh case :tup:

 

[beastlywarrior228]

Ummmmm thats not exhaust

 

[ryder133]

Ummmmm thats not exhaust

Then what is it, Smarty pants?

 

[87warrior917]

Then what is it, Smarty pants?

Def not exhaust, just pressure from the piston coming down, thats why theres a crank case vent

 

[ryder133]

Oh. Still think I'am going to buy a new crankcase because I like to waste money.

 

[ryder133]

Just sent $200 to my paypal through my bank. Now I wait 8 days :argh:

 

[bluewolf06]

Great looking case savers. I'm waiting on mine yet. Not lookin foreward to repairing my case again.

 

[FastBurn]

can you help with case?

This is how i got the quad. I'd like to keep the case the way it is and not more broken. Can you help still make a saver and figure out how to attach top or go back to that hole in frame? Or do i just need to start with a new case?

 

[duneracerweston]

yep, i can make you one to match that case. i would like to get a measurement from the center of the bolt whole to were it is broke so i can build it to be a kind of self supporting case saver. shoot me a pm when you want it!

 

[duneracerweston]

BUMP

thought id update the thread

price is $45.20 for one shipped priority 2-3 day mail.

package deals and group buys get a discount depending on how many are ordered.

these can be used with or without the OEM chain guard.

i can make them to fit any size sprocket! 11-16t!

without.

here is the instructional write up on what needs to be modified to make it work with the oem cover.

step one: remove cover and cut along the factory seam to shave the flat piece shown in this picture.

step two: cut off the plastic wire holder tab by the lower mount hole on the guard as shown picture.

step three: reinstall the cover and the case saver with the oem hardware and your done!

when finished it will look just like this!

i have the material to make close to 30 of these and can pump one out in a hour and a half so order as many ans you need! please do not leave your case unprotected! if you bust the case it can set you back 40-200 dollars! my case savers are only 45 bucks! i have had numerous chains bust with my case savers and not one has done any damage! 100% satisfaction garrenty!

 

[rowdy_sohc]

Let me get some cash and I will let you know! I def want one though.

 

[johnsmith133]

same. are they still 45 dollars? and do u make them for different size front sprockets? lmk asap

 

[duneracerweston]

BUMP

thought id update the thread

price is $45.20 for one shipped priority 2-3 day mail.

package deals and group buys get a discount depending on how many are ordered.

these can be used with or without the OEM chain guard.

i can make them to fit any size sprocket! 11-16t!

without.


here is the instructional write up on what needs to be modified to make it work with the oem cover.

step one: remove cover and cut along the factory seam to shave the flat piece shown in this picture.

step two: cut off the plastic wire holder tab by the lower mount hole on the guard as shown picture.

step three: reinstall the cover and the case saver with the oem hardware and your done!

when finished it will look just like this!


i have the material to make close to 30 of these and can pump one out in a hour and a half so order as many ans you need! please do not leave your case unprotected! if you bust the case it can set you back 40-200 dollars! my case savers are only 45 bucks! i have had numerous chains bust with my case savers and not one has done any damage! 100% satisfaction garrenty!

same. are they still 45 dollars? and do u make them for different size front sprockets? lmk asap

ask yourself, "did i read the post above?"

 

[johnsmith133]

LOL I DEFINITLEY DIDNT HAHA. sorry bro. was just mesmerized by the pictures i didnt really take the time to look honestly. ok haha well i will take one if that makes u less mad XD

 

[duneracerweston]

LOL I DEFINITLEY DIDNT HAHA. sorry bro. was just mesmerized by the pictures i didnt really take the time to look honestly. ok haha well i will take one if that makes u less mad XD

Lmao, ight, pm me when your ready for one and ill jump on it

 

[1579]

i WAS in for one of these, but when I looked at my case closer the mounting bolts arnt even there any more. Too bad the previous owner was on this forum for one of these. They look great!!

 

[johnsmith133]

yeah man im trying to support ppl that give to the warrior community so thats why i want one. also to save my case