DeathShadow
Well-Known Member
w00h00 I got some sneak peak pictures of my bike as I am putting her back together. 
By the end of this week I should have the cash for some Wicked black +3 A-Arms and braided steel break lines. I am also getting all black plastics and a full black rubber seat cover. The chrome clutch cover will be in at the end of the month and then its on to Elkas!
The above wiring is only temporary you won't see it when I am done...
Well guys here are my mods (I probably forgot to list some ****):
- Durablue 2+2 Eliminator Axle
- TrailTech 6500K MR16 H.I.D billet lights w/covers, custom shock mounts, & handlebar mounted rocker switch.
- Factory Effex All Grip Seat Cover
- IMS Roll Design foot pegs
- Powroll/JE bore kit 365cc 10.5:1
- Race Velocity Port & Polish
- SERDI Valve job
- 1mm Oversized valves
- Powroll .430 midrange cam
- Valve springs w/Titanium keepers & custom spacers
- Edelbrock Qwiksilver carburetor w/thumb throttle.
- Pro Design K&N Intake kit w/Water Repellent Outerwears pre-filter
- Custom chrome K&N case vent filter/airbox mod
- Pro Circuit T4 Exhaust
- FMF Powerbomb Header
- Custom Direct bolt on shifter
- DG Alloy Series Nerf Bars w/blue webbing
- Custom PermaCool/Big Bear oil cooler mod.
- DG Off-road Series polished bumper
- Full body Ricochet/Armadillo skidplates
- Renthal Rider bars w/FMF 909 Grips
- OEM Yamaha front & rear shock covers (blue)
- Custom under seat waterproof 12 Volt outlet
- Tusk Billet gas cap, Rear break master cyl., & light cover
- Renthal Chain & sprocket kits 12/40 13/40 & 14/40
- Dynatek FS Programmable CDI
- Moose EZ' Adjust Clutch Perch w/forged lever & Motion Pro clutch cable
- Moose Polished Break lever
- ITP HD 6 ply Holeshots Rear 20x11x9
- ITP XCR 6 ply Holeshots Front 21x7x10
- ITP C-series polished wheels
- Custom made Air-Scoops (spencer)
- Yamaha GYTR Billet Stator cover
- Yamaha GYTR Billet front sprocket cover
- Works Connection frame guards
- Pro Design Teather switch (blue)
- Tusk Billet Parking break block-off plate
- Hand Polished Throttle housing cover & Front break cylinder cap.
- PrimaryDrive 8,200 lb tensile strength X-Ring Chain
- Visu In-Line Fuel filter (mmm raw HP here)
- Custom blue high output LED motor accent lighting & toggle switch on dash.
- Custom installed Grease/zerk fitting on axle carrier.
- Custom cut plastics
- Custom painted black wheel hubs
Coming next when I get money:
- DP Clutch kit w/springs
- +2 or +3 A-Arms
- Works/Elka shocks with remote rez.
- Chrome Clutch Cover <- ON THE WAY!! w00t
Current projects:
*Putting quad back together.
*Finishing up direct mount shifter.
*Polishing misc. parts on the quad.
Thats it for now I think X_X...
By the end of this week I should have the cash for some Wicked black +3 A-Arms and braided steel break lines. I am also getting all black plastics and a full black rubber seat cover. The chrome clutch cover will be in at the end of the month and then its on to Elkas!
The above wiring is only temporary you won't see it when I am done...
Well guys here are my mods (I probably forgot to list some ****):
- Durablue 2+2 Eliminator Axle
- TrailTech 6500K MR16 H.I.D billet lights w/covers, custom shock mounts, & handlebar mounted rocker switch.
- Factory Effex All Grip Seat Cover
- IMS Roll Design foot pegs
- Powroll/JE bore kit 365cc 10.5:1
- Race Velocity Port & Polish
- SERDI Valve job
- 1mm Oversized valves
- Powroll .430 midrange cam
- Valve springs w/Titanium keepers & custom spacers
- Edelbrock Qwiksilver carburetor w/thumb throttle.
- Pro Design K&N Intake kit w/Water Repellent Outerwears pre-filter
- Custom chrome K&N case vent filter/airbox mod
- Pro Circuit T4 Exhaust
- FMF Powerbomb Header
- Custom Direct bolt on shifter
- DG Alloy Series Nerf Bars w/blue webbing
- Custom PermaCool/Big Bear oil cooler mod.
- DG Off-road Series polished bumper
- Full body Ricochet/Armadillo skidplates
- Renthal Rider bars w/FMF 909 Grips
- OEM Yamaha front & rear shock covers (blue)
- Custom under seat waterproof 12 Volt outlet
- Tusk Billet gas cap, Rear break master cyl., & light cover
- Renthal Chain & sprocket kits 12/40 13/40 & 14/40
- Dynatek FS Programmable CDI
- Moose EZ' Adjust Clutch Perch w/forged lever & Motion Pro clutch cable
- Moose Polished Break lever
- ITP HD 6 ply Holeshots Rear 20x11x9
- ITP XCR 6 ply Holeshots Front 21x7x10
- ITP C-series polished wheels
- Custom made Air-Scoops (spencer)
- Yamaha GYTR Billet Stator cover
- Yamaha GYTR Billet front sprocket cover
- Works Connection frame guards
- Pro Design Teather switch (blue)
- Tusk Billet Parking break block-off plate
- Hand Polished Throttle housing cover & Front break cylinder cap.
- PrimaryDrive 8,200 lb tensile strength X-Ring Chain
- Visu In-Line Fuel filter (mmm raw HP here)
- Custom blue high output LED motor accent lighting & toggle switch on dash.
- Custom installed Grease/zerk fitting on axle carrier.
- Custom cut plastics
- Custom painted black wheel hubs
Coming next when I get money:
- DP Clutch kit w/springs
- +2 or +3 A-Arms
- Works/Elka shocks with remote rez.
- Chrome Clutch Cover <- ON THE WAY!! w00t
Current projects:
*Putting quad back together.
*Finishing up direct mount shifter.
*Polishing misc. parts on the quad.
Thats it for now I think X_X...
