electrical problem

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

metrakit

Member
Joined
May 3, 2011
Messages
7
Reaction score
0
hy ,
i have a warrior and i am from portugal.

recently my cdi burned and i bought a new harness with the cdi , because my harness was diferente.

my cdi was that one that the wires come out ,

and the one i bought was the one that the harness plug in the cdi.

after it i installed all the new harness , but the wires and colors are diferent.

in the front its all turned on

but in the motor (4 wires ) i only know the position of 2.

i tryed already to start the moto and it only send smoke.

it has spark , a litle i think.

does any one ever changed harness and know all good conections to the motor?

thanks
 
my warrior is from 97 and i bought it from 2000 i thnk.

my colors at the motor are :
yellow
red
blue
white/green

the harness is :

red
white
green
brown/white

can you see it ?

thanks
 
in the front i got the key on and the can make the start with the wires to
 
so my should the 96 maybe and bought the 2000

can anyone help me with the wires ?

thanks
 
the different color, are you talikng about the stator wires because an aftermarket stator has differnt color wires then the harness but it plugs in and works correctly
 
the plugs in are diferent to ,

it might be other harness model but i take it off of a warrior..

can i adapt it or i need to buy the the stator too?

thanks
 
I would just get the right year cdi and put your old harness back on if the only problem was the cdi
 
are you looking on the frame under the shifter? If that is all that there someone removed part of it
 
hi

no iit only says that ,

on the chassis and the motor the same number.

thanks
 
Back
Top