Loaded up and ready to go riding!!!

[YAMAHAULER]

 

[88WarriorBoy]

yeah you look a a hair rich

 

[1999yamahawarrior]

Go down to a 152.5 or 150 main and it should do the trick

 

[YAMAHAULER]

yeah I just hope going to a 152.5 isn't gonna make her too lean cause there is some tan/brown on there but won't hurt to try when the jet is only $3at the shop here right?

 

[YAMAHAULER]

Go down to a 152.5 or 150 main and it should do the trick

well I started at a 150 when I put the HMF from the 92 to the 02 and she was too lean so I jumped to a 155 so I guess 152.5 should set her just about perfect then

 

[MS_Warrior]

some one shed some light on the two mods mentioned in this thread!!!! what is the ink pen mod and the valve stem cap mod? and what do they do?

 

[YAMAHAULER]

you replace the spring for the accelerator pump rod with a BIC clicker pen spring makes it spring back faster and the valve cap you put on the top of the accelerator pump rod behind the black plastic side cover on carb makes it respond quicker/sooner when hitting the throttle

 

[MS_Warrior]

Aaaahhhhh...... Can it be any clicker pen or does it have to be a bic? You fackers have been holding out on me!!! What else do I not know about Hahaha besides lots!

 

[YAMAHAULER]

Bic's have a stronger stiffer spring than the other cheaper pens

well just hang around your bound to learn all kinds of new tricks of the trade here lol

 

[MS_Warrior]

Bic's have a stronger stiffer spring than the other cheaper pens

well just hang around your bound to learn all kinds of new tricks of the trade here lol

I have already learned a ton! And bic it is haha!