Oil Cooler????

[1998yamahawarrior]

ya your right bomber lack of sleep yesturday i mixed the two up. thanx for catching that.

 

[hawkster0001]

i did my whole big bear oil cooler for about 45, maybe another 5-10 for some more lines but you can do it for about 50. heres the bigbear piece http://cgi.ebay.com/ebaymotors/Yamaha-Moto4-350-92-Oil-Cover-115892-_W0QQcmdZViewItemQQhashZitem19bb5e57a4QQitemZ110517704612QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

 

[missouritrailrider]

430 kit can be combination of stroker/bore

 

[daro2244]

i did my whole big bear oil cooler for about 45, maybe another 5-10 for some more lines but you can do it for about 50. heres the bigbear piece http://cgi.ebay.com/ebaymotors/Yamaha-Moto4-350-92-Oil-Cover-115892-_W0QQcmdZViewItemQQhashZitem19bb5e57a4QQitemZ110517704612QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

Thanks!! I just bought that part , it need to be anyting else inside that part??? or is just that? , the lines the cooler and the connectors, that's it?

 

[daro2244]

I'm confused !!! and the Pics in the tutorial are miissing. do i need the oil pump as well? or that is in the warrior already?

 

[1998yamahawarrior]

the oil pump is already in your warrior. at the top of this section there is a thread call great parts diagrams look in there on one of the links at a parts break down for a big bear oil pump. the breakdowns will show any needed parts

 

[daro2244]

I got this parts and I'll get the oil cooler trany from autozone w/ the lines this week. that's it?

 

[DeadLastRacing]

The pics are not missing, look through all the posts, there are some more pics in some of the later pages. Are you planning on doing the big Bear cooler of the Clutch cover cooler. If you doing big bear then you need to buy the adapter/pump. If you do the cover mod then you need to tap and block it.

 

[daro2244]

The pics are not missing, look through all the posts, there are some more pics in some of the later pages. Are you planning on doing the big Bear cooler of the Clutch cover cooler. If you doing big bear then you need to buy the adapter/pump. If you do the cover mod then you need to tap and block it.

Yeah Dead I'm doing the big bear one, and the parts I have are this(see pic) and I'll get the tranny cooler w/ the lined this week. and yes I went trough the all tutorial, and the Best post is the first one.very detailed, but the pic are missing :-[???

 

[daro2244]

Hi; Does anybody have a link to the big bear oil cooler tututorial.
it has to be step by step and w/ pictures, I'm a idiot w/ following instructions w/out pics