yeoldetymewarrior8
Well-Known Member
I dont feel like taking my motor back apart, so im going to part out :'( Anyone who wants dibs on anything let me know before i post prices and stuff. Most parts were first used in May 06. Then sat from september until now. Here is the parts/price list. all prices are not including shipping. I will accept paypal, or cash through the mail. PM me for pictures. Similar items i will include as a package. Let me know.
Here it goes:
A-arms: Magnum +2 Powder coated candy blue bottom, top chromed w/ Tie Rods-May 06-$500
Air Box: Pro Flow adaptor and filter, comes with elbow to carb-$80
Axle: Durablue Eliminator 2+2 Chrome Pealed off, Includes Locknut- $160
Axle Carrier: Stock, brand new bearings installed-$70
Complete Big Bear oil cooler setup: Adaptor, stainless braided lines, and cooler-May 07-SOLD
Box of bolts: A whole bunch of stock hardware off warrior, not everything there, most stuff is labled-$45
Bumper: Blingstar Iron Cross-SOLD
Carburator: Edelbrock, comes with manual and bag of stuff-SOLD
Case Saver: Noss Machine Case Saver-$50
CDI: stock-$60
Chain: RK 520 X-Ring-$40
Clutch Lever and Cable: MSR Grip Lever, stock cable-$15
Engine: Stock Bore, JE piston, Ported Head, Hot Cam, New Rings, Burns oil. EBC clutch, New DID Timing Chain, starter included-$600
Exhaust: Famous Cut yoshi shortened muffler-$240
Footpegs: IMS Roll Design Kickup Footpegs-$220
Frame: Powdercoated Candy Blue w/ title-May 06-$550
Front Brakes: Calipers, Galfer Lines, Master Cylinder MSR Grip lever-$140
Front Fenders: Maier, White, Shaved-May 06-$75
Front Hubs: Stock, stock paint, bearings good-$50
Front Shocks: Works A/T Steelers for +2 arms, very soft may need rebuild or spring stiffened-SOLD
Front Sprocket: Renthal 14T-$10
Front Tires/Rims: 21-7-10 Kenda Klaws on douglas .190's a lot of tread life left-SOLD
Fuse Holder: Baught off ebay and never used-$15
Gas Cap: Tusk Aluminum w/ valve-May 06-$15
Gas Tank: Good Condition, comes with stock cap-$50
Grab Bar: Stock w/ Number Plate-$20
Handlebar Starter Switch: Stock, Baught new in May 06-$65
Handlebars: Pro Taper Contour, Henry/Reed Bend-May 06-$50
Headpipe: Yoshimura Stainless Steel-SOLD
High Performance Coil: Baught off ebay-May 06-$40
Key Switch: Lost spare-may 06-$20
Nerf Bars: AC normal wear, stickers scratched-$100
Rear Brakes: Lever, Master Cylinder, Resevoir, Line, Caliper, Nac's Block off plate-$90
Rear Fenders: Maier White, some scuffs, burn from exhaust-May 06-$110
Rear Hubs: Stock, stock paint, splines are good-$40
Rear Shock: 01 Raptor w/ linkage, works good, no leaks-$75
Rear Sprocket: Renthal Ultralight 40T good cond.-$30
Rear Tires/Rims: 20-11-9 Razr on douglas .190's, 50% tread left-$70
Rectifier: Stock, works good-$35
Seat: Complete seat, Factory FX seat cover, great cond-$65
Seat: Complete, Stock Cover, good condition, little, if any, tears-$45
Shifter: Banshee direct fit, bent to clear big bear oil cooler stuff-$40
Spindles: Stock, reemed to fit ball joints, will not work with stock a-arms-$100
Starter Solenoid: Works good-May 06-$25
Steering Stem: IMS Roll Design +1 Chrome, comes with oversized IMS Clamps and bar pad-May 06-$310
Swingarm: Stock, Painted Black in may 06-$70
Swingarm Bearings: New in package, Pivot works swingarm bearing kit-$25
Swingarm Pivot Bolt: Nicaciled or something, it was dipped to resist corrosion, comes with nut that is not coated-May 06-$25
Tank Cover: Maier White normal scuffs from seat and removal-May 06-$20
Throttle Housing: Terrycable billet aluminum, scratches on top very smooth-May 06-$90
Wiring Harness: Baught Brand new in may 06, brand new black pro design killswitch wired into it-$130
Thats all I can think of off the bike, I have a deal pending on the GYTR stator cover and powermadd's, if it falls through i'll post them up. The shiney parts, i will do my best to polish and clean before shipping. If part comes off with bolts, i will include bolts, 98% of the bolts on my quad are polished stainless steel. If there is any parts that I may have forgot and you want, let me know. Thanks.
Whatever I dont sell on here in 2 weeks or so is going on ebay. I need monayyy!
Here it goes:
A-arms: Magnum +2 Powder coated candy blue bottom, top chromed w/ Tie Rods-May 06-$500
Air Box: Pro Flow adaptor and filter, comes with elbow to carb-$80
Axle: Durablue Eliminator 2+2 Chrome Pealed off, Includes Locknut- $160
Axle Carrier: Stock, brand new bearings installed-$70
Complete Big Bear oil cooler setup: Adaptor, stainless braided lines, and cooler-May 07-SOLD
Box of bolts: A whole bunch of stock hardware off warrior, not everything there, most stuff is labled-$45
Bumper: Blingstar Iron Cross-SOLD
Carburator: Edelbrock, comes with manual and bag of stuff-SOLD
Case Saver: Noss Machine Case Saver-$50
CDI: stock-$60
Chain: RK 520 X-Ring-$40
Clutch Lever and Cable: MSR Grip Lever, stock cable-$15
Engine: Stock Bore, JE piston, Ported Head, Hot Cam, New Rings, Burns oil. EBC clutch, New DID Timing Chain, starter included-$600
Exhaust: Famous Cut yoshi shortened muffler-$240
Footpegs: IMS Roll Design Kickup Footpegs-$220
Frame: Powdercoated Candy Blue w/ title-May 06-$550
Front Brakes: Calipers, Galfer Lines, Master Cylinder MSR Grip lever-$140
Front Fenders: Maier, White, Shaved-May 06-$75
Front Hubs: Stock, stock paint, bearings good-$50
Front Shocks: Works A/T Steelers for +2 arms, very soft may need rebuild or spring stiffened-SOLD
Front Sprocket: Renthal 14T-$10
Front Tires/Rims: 21-7-10 Kenda Klaws on douglas .190's a lot of tread life left-SOLD
Fuse Holder: Baught off ebay and never used-$15
Gas Cap: Tusk Aluminum w/ valve-May 06-$15
Gas Tank: Good Condition, comes with stock cap-$50
Grab Bar: Stock w/ Number Plate-$20
Handlebar Starter Switch: Stock, Baught new in May 06-$65
Handlebars: Pro Taper Contour, Henry/Reed Bend-May 06-$50
Headpipe: Yoshimura Stainless Steel-SOLD
High Performance Coil: Baught off ebay-May 06-$40
Key Switch: Lost spare-may 06-$20
Nerf Bars: AC normal wear, stickers scratched-$100
Rear Brakes: Lever, Master Cylinder, Resevoir, Line, Caliper, Nac's Block off plate-$90
Rear Fenders: Maier White, some scuffs, burn from exhaust-May 06-$110
Rear Hubs: Stock, stock paint, splines are good-$40
Rear Shock: 01 Raptor w/ linkage, works good, no leaks-$75
Rear Sprocket: Renthal Ultralight 40T good cond.-$30
Rear Tires/Rims: 20-11-9 Razr on douglas .190's, 50% tread left-$70
Rectifier: Stock, works good-$35
Seat: Complete seat, Factory FX seat cover, great cond-$65
Seat: Complete, Stock Cover, good condition, little, if any, tears-$45
Shifter: Banshee direct fit, bent to clear big bear oil cooler stuff-$40
Spindles: Stock, reemed to fit ball joints, will not work with stock a-arms-$100
Starter Solenoid: Works good-May 06-$25
Steering Stem: IMS Roll Design +1 Chrome, comes with oversized IMS Clamps and bar pad-May 06-$310
Swingarm: Stock, Painted Black in may 06-$70
Swingarm Bearings: New in package, Pivot works swingarm bearing kit-$25
Swingarm Pivot Bolt: Nicaciled or something, it was dipped to resist corrosion, comes with nut that is not coated-May 06-$25
Tank Cover: Maier White normal scuffs from seat and removal-May 06-$20
Throttle Housing: Terrycable billet aluminum, scratches on top very smooth-May 06-$90
Wiring Harness: Baught Brand new in may 06, brand new black pro design killswitch wired into it-$130
Thats all I can think of off the bike, I have a deal pending on the GYTR stator cover and powermadd's, if it falls through i'll post them up. The shiney parts, i will do my best to polish and clean before shipping. If part comes off with bolts, i will include bolts, 98% of the bolts on my quad are polished stainless steel. If there is any parts that I may have forgot and you want, let me know. Thanks.
Whatever I dont sell on here in 2 weeks or so is going on ebay. I need monayyy!
![Lamicall Motorcycle Phone Mount Holder - [Dual Vibration Dampener] [Anti Shake] Motorcycle Cell Phone Holder, Upgrade Bike Phone Mount, Fit iPhone 15/14/ 13 Pro Max, More 4.7-6.7" Phones, Black](https://m.media-amazon.com/images/I/41bnoU+bpuL._SL500_.jpg)
