Warrior cam's

[89warrior]

Im looking to put a cam in my warrior. Anyone have any ideas what cam i should go with. O and who makes Megacycle cam? are they any good?

 

[imtarnished]

From what I have read on here, some people say that they can drop your low end a little bit, but bump your mid-high range. I personally haven't noticed it, and I have no complaints with mine.
take a look at this
http://www.megacyclecams.com/catalog/catalog.pdf and this
http://www.megacyclecams.com
~Bill

 

[yamaharaptor350]

webcam or powroll cam

 

[whitebros87]

Megacycle is great I have one in mine and it is a .450 of course that's more for mid to top end power. But still makes mine pretty fast with all my other mods.

 

[89warrior]

Well my warrior is just about all stock. I have a 10.5:1 wiseco piston and a full 06 raptor 350 exhaust system. So I really don't know what lift I should go with. I'm looking for top end power. and while I'm at it should I go with aftermarket springs and valves? If so what kind? Thanks for the help guys!

 

[87warrior]

when u change cams you want to change springs id go with R/D springs

 

[xj4m3]

I Have a Duncan Racing .450 cam and i can say that i like it a lot. While i was putting in the cam i put in R/D valve springs and these two on top of my piston really woke the top end up a ton. I did however lose some bottom end but it pulls very strong from 1/4 throttle on up. If you do any woods or slow riding i would not go with a .450 cam, a .430 would be better suited.

 

[89warrior]

OK well thanks for the help!