DeadLastRacing
Well-Known Member
HAHah, live, really? Sounds a little dangerous. Anyways, I doubt it bolted right up? How much modding did you have to do? Make or alum wield it onto a old bracket?
XC Warrior racer rebuild
- Thread starter 1998yamahawarrior
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
W T HECK?
Well-Known Member
bingo! its welded to the the AC racing standard grab bar, the 450 Dirt Works bumper is wider than the Warrior frame, but its just narrow enough to be welded to the outside tubing of the AC.
i baisically cut the loop off the AC ,right before it bends,then welded the DW bar to the two pieces left on the frame,then took a piece of flat stock and welded it across the frame to cover up the two cut off ends the AC, and add a little more support to it
i baisically cut the loop off the AC ,right before it bends,then welded the DW bar to the two pieces left on the frame,then took a piece of flat stock and welded it across the frame to cover up the two cut off ends the AC, and add a little more support to it
