Congrats on your second elite dude.
Chassis | Suspension | Controls
Frame: Stock
A Arms: ASR +2 400ex LT
Swingarm: Hansen +2
Steering Stem: +3 Roll Design antivibe
Stabilizer: N/A
Axle: Niche adjustable +2+4
Carrier: LSR billet dual row round house
Locknut: 3 piece Tusk
Hubs F|R: stock
Bars: 1 1/8" Trail Tech X fat bars
Throttle/Clutch Lever: Terry Cable dual Throttle, ASV C6 Pro shorty
Grips: ODI Rogue
Nerfs: Raptor 350 Alba pro peg
Pegs: Raptor 350
Bumper: IMS Classic 1 off Bill Balance
Grab Bar: Custom fabricated
Front Shocks: 2014 YFZ450R Jogoca triple rate
Rear Shock: custom built 01 Raptor 660 body with banshee coil spring
Brake Pads: EBC
Brake Lines:Front- 47" Speedlinez SS
Rotors F|R: Stock / Tusk Typhoon
Rims F|R: Alba beadlocks with Goldspeed rings
Tires F|R: GBC XC Master
Body
Plastic: stock fenders & aftermarket Maier hood
Graphics|Seat Cover: No Graphics, Custom Seat cover
Number Background: N/A
Handguards: Powermadd Sentinel
Bar Pad: N/A
Fuel Tank: IMS Oversized
Skids plates: DRW Performance
Lighting: two 4" round LED's, 6" LED dual row bar mounted to handlebars & Afterburner LED taillight
Engine|Drive System
Cylinder Head: Mild P&P
Gaskets: Tusk
Piston: 84mm Wiseco 10.25:1
Cam|Valves Springs: Web .390, stock valves, Kibblewhite HD titanium springs
Bore & Stroke: 84mm × 63.5mm
Displacement: 357cc
Carburetor: 06 yz250f 37mm Keihn FCR with QS3 & R&D Flex jet
Spark plug: NGK D9EA
Stator: Db electrical
Shifter: IMS direct
Air Filter|Box: K&N with Outerwears pre filter and no box
Header|Silencer: custom DRW Performance header & midpipe with 11" Yoshimura RS-3 silencer
Clutch|Plates|Springs: Driveline Performance
Gearing F|R: 14-40
Chain: DID Gold X-ring
CDI|Killswitch: ProCom/Outlaw racing tether
Cooling: DRW oil filter cap with an6 stainless braided lines to a 10 row Performance cooler with 4" pull spal fan
Other: all electrical has been swapped to 97-01
With custom built L&S Harness, yfz450 dual piston calipers front & rear, yfz450 Rath Racing battery box & WPS Featherweight Li battery, DRW Case brace & saver, B.C.C. Skids sprocket guard, DRW rotor guard, Raptor 350 clutch cable mod, Modquad rear fender braces,
Fly Racing start button, DRW Performance billet clutch basket, Modquad chain slider,
T.M. Designworks powerlip chain guide,
DynaTech ignition coil with 10mm plug wire,
Chassis | Suspension | Controls
Frame: Stock
A Arms: ASR +2 400ex LT
Swingarm: Hansen +2
Steering Stem: +3 Roll Design antivibe
Stabilizer: N/A
Axle: Niche adjustable +2+4
Carrier: LSR billet dual row round house
Locknut: 3 piece Tusk
Hubs F|R: stock
Bars: 1 1/8" Trail Tech X fat bars
Throttle/Clutch Lever: Terry Cable dual Throttle, ASV C6 Pro shorty
Grips: ODI Rogue
Nerfs: Raptor 350 Alba pro peg
Pegs: Raptor 350
Bumper: IMS Classic 1 off Bill Balance
Grab Bar: Custom fabricated
Front Shocks: 2014 YFZ450R Jogoca triple rate
Rear Shock: custom built 01 Raptor 660 body with banshee coil spring
Brake Pads: EBC
Brake Lines:Front- 47" Speedlinez SS
Rotors F|R: Stock / Tusk Typhoon
Rims F|R: Alba beadlocks with Goldspeed rings
Tires F|R: GBC XC Master
Body
Plastic: stock fenders & aftermarket Maier hood
Graphics|Seat Cover: No Graphics, Custom Seat cover
Number Background: N/A
Handguards: Powermadd Sentinel
Bar Pad: N/A
Fuel Tank: IMS Oversized
Skids plates: DRW Performance
Lighting: two 4" round LED's, 6" LED dual row bar mounted to handlebars & Afterburner LED taillight
Engine|Drive System
Cylinder Head: Mild P&P
Gaskets: Tusk
Piston: 84mm Wiseco 10.25:1
Cam|Valves Springs: Web .390, stock valves, Kibblewhite HD titanium springs
Bore & Stroke: 84mm × 63.5mm
Displacement: 357cc
Carburetor: 06 yz250f 37mm Keihn FCR with QS3 & R&D Flex jet
Spark plug: NGK D9EA
Stator: Db electrical
Shifter: IMS direct
Air Filter|Box: K&N with Outerwears pre filter and no box
Header|Silencer: custom DRW Performance header & midpipe with 11" Yoshimura RS-3 silencer
Clutch|Plates|Springs: Driveline Performance
Gearing F|R: 14-40
Chain: DID Gold X-ring
CDI|Killswitch: ProCom/Outlaw racing tether
Cooling: DRW oil filter cap with an6 stainless braided lines to a 10 row Performance cooler with 4" pull spal fan
Other: all electrical has been swapped to 97-01
With custom built L&S Harness, yfz450 dual piston calipers front & rear, yfz450 Rath Racing battery box & WPS Featherweight Li battery, DRW Case brace & saver, B.C.C. Skids sprocket guard, DRW rotor guard, Raptor 350 clutch cable mod, Modquad rear fender braces,
Fly Racing start button, DRW Performance billet clutch basket, Modquad chain slider,
T.M. Designworks powerlip chain guide,
DynaTech ignition coil with 10mm plug wire,
