boaring a carb

[buzzy613]

im going to raise the needle to the last clip to day and see if i can get a 50and just tune, it was wired it was white but i dried my finger off and wiped it and most of it came off to a grey

 

['00 WO-YA!]

K, make sure that the clip gets moved down on the needle, thus moving the needle itself up.

 

[buzzy613]

ill have to get at it tomarow i didnt have time but ill be sure to richen the needle

 

[buzzy613]

so a 50 pilot with 1 1/2 turns out and my needle on the last position richest,and should a 150 in the main be fine?

 

[duneracerweston]

Sounds good to me

 

[buzzy613]

then thats what illl do tonight

 

['00 WO-YA!]

You'll just have to give it a shot a see man. Put the 50 in & try 1.5 turns out, then adjust about a 1/4 turn at a time til it acts right. When my pilot is lean my junk just falls on it's face.

 

[buzzy613]

i got to wait and order it, but coryv4 gave me the carb off his and i just have to throw my main in it the only bad thing is its the twin cable

 

[buzzy613]

alright i got a 52.5 ordered and i found out i boared it to a 37 and a quarter but i took it out for a quick rip to go play in the snow and i did have a blast!

 

[rappy'97]

Awesome man. Post a pic if you can.

 

[buzzy613]

i guess while its off i will

 

[duneracerweston]

icstfu:

^ always wanted to use that