What to upgrade on 350 warrior

[Mathius]

I looked on ebay so is it the yz250 shifter shaft? Sorry for being a pain in the a#s. I'm learning. I've heard something about a wet clutch?

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

You just need the YZ250 shifter itself. It seems that the 250F shifters are the most popular.
Like this one. http://www.ebay.com/itm/Yamaha-YZ25...Parts_Accessories&hash=item2579488956&vxp=mtr

 

[JakeBloom]

You just need the YZ250 shifter itself. It seems that the 250F shifters are the most popular.
Like this one. http://www.ebay.com/itm/Yamaha-YZ25...Parts_Accessories&hash=item2579488956&vxp=mtr

Buy this one. It's the exact one I got (same ebay seller too). It's cheap, and appears to be great quality.

 

[Warrior22]

The year doesn't matter? If not I'm going to buy the one you recommend.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[bkroll84]

I need a direct shifter set up for big bear oil cooler anyone got one? or wants to make one to sell

 

[Mathius]

I need a direct shifter set up for big bear oil cooler anyone got one? or wants to make one to sell

Get a banshee shifter, their longer. You'll have to bend it around the cooler. You'll want one that is easy to bend, and modify to your setup.
This would probably be a good one. http://www.ebay.com/itm/1987-1988-1...Parts_Accessories&hash=item565239ca07&vxp=mtr

 

[bkroll84]

Thought you have to cut it than weld it up. I just dont have access to a welder

 

[Mathius]

Thought you have to cut it than weld it up. I just dont have access to a welder

From what I've heard, you just have to bend it..

 

[Warrior22]

Thanks Mathius an& Jake for the help. I bought the one yall recommend.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Mathius]

Thanks Mathius an& Jake for the help. I bought the one yall recommend.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

No problem man.. It's a good shifter, and an easy mod to do. :tup:

 

[1998yamahawarrior]

You do have to weld one up for the big bear cooler set-up. The shift shaft is to close to the filter housing to get a bend I would trust to hold up. Bending a banshee shifter is for around a pull start.

 

[Mathius]

You do have to weld one up for the big bear cooler set-up. The shift shaft is to close to the filter housing to get a bend I would trust to hold up. Bending a banshee shifter is for around a pull start.

Oh ok... So in other words don't listen to me on this one.. lol

 

[bkroll84]

Anyone wanna make 1 ill pay 50 bucks to them ill cover parts and shipping

 

[mudbogginsouthernboy]

What gearing should I do?

 

[Mathius]

Anyone wanna make 1 ill pay 50 bucks to them ill cover parts and shipping

I could do it if I had some pictures of what to do?

What gearing should I do?

14/38 if you have a 20" tire.
14/40 if your roll'n a 22".

 

[bkroll84]

There is a forum on here on how to do it

 

[Mathius]

There is a forum on here on how to do it

Yah I know, but I couldn't find it?

 

[bkroll84]

http://www.yfm350.com/forums/showthread.php?t=15046

 

[1998yamahawarrior]

You beat me to it BK!!!!!

 

[Mathius]

I could do that...
I see that Pat built one to, I found a thread with a picture of his shifter.

 

[bkroll84]

Sad part is I can weld. Have certs in welding and brazing but I run a thermo forming shop/paint shop on thing we weld is plastic lol. Someone please make this for me and I will also include a hood like mine. Made 2 of them just haven't trimmed them yet. Check pic in qotm to see hood