well i am looking into jetting my stock carb and i have been reading the directions on the dynojet web site can anyone fill me in what this means?
Install Dynojet needle on groove#4 for applications below 5000 feet, groove #3 for above
5000 feet, using all stock spacers.
whats the below and above 5000 feet for?
Remove stock main jet and replace with Dynojet main provided. If you are running the
stock exhaust use the DJ134 below 3000 feet, DJ130 from 3000 to 6000 feet and DJ126
above 6000 feet. If you are running an aftermarket exhaust, use the DJ136 below 3000
feet, DJ132 from 3000 to 6000 feet and DJ128 above 6000 feet. Be sure that the jet you
are changing is the main jet. Discard the plastic cup that is on the stock main jet.
and i have a aftermarket HMF pipe but i don't get what the above and below feet mean?? any help on this?
Install Dynojet needle on groove#4 for applications below 5000 feet, groove #3 for above
5000 feet, using all stock spacers.
whats the below and above 5000 feet for?
Remove stock main jet and replace with Dynojet main provided. If you are running the
stock exhaust use the DJ134 below 3000 feet, DJ130 from 3000 to 6000 feet and DJ126
above 6000 feet. If you are running an aftermarket exhaust, use the DJ136 below 3000
feet, DJ132 from 3000 to 6000 feet and DJ128 above 6000 feet. Be sure that the jet you
are changing is the main jet. Discard the plastic cup that is on the stock main jet.
and i have a aftermarket HMF pipe but i don't get what the above and below feet mean?? any help on this?
