need to figure out how to widen the front suspension

[Johnny5]

I am currently running a 98 350 warrior. I was wondering if there was any quads that I can interchange a arms with to get the front wider and widest possible. What do I need to do. I have been running moto with stock arms and works shocks need to make wider for turns thanks any advice would help:atv:

 

[Gus]

I run the American Star +2 width a-arms, they are really well made, i'd recommend them for sure.
http://amstarmanufacturing.com/

 

[Johnny5]

How long have u ran with and what changes if any did you have to make for them to work

 

[Beastmode17]

You can use 400ex Aftermarket a arms with a few mods for them to fit, But I would do what GUS said and get the American stars, They will bolt straight on. For a better idea of extended a arms, Look at a few of the Elite builds. Hope this helps

 

[Gus]

How long have u ran with and what changes if any did you have to make for them to work

I've ran them close to a year, no real major changes, they are a bolt on. You can get away running stock brake lines, but if you have the money it's worth it to get the extended lines with the arms.

 

['00 WO-YA!]

I'd go +3 man, fullflight makes a nice plus 3 arm setup. It's simple, warrantied, etc. those and some better shocks will do you nicely.

 

[Johnny5]

Sounds like a place to starts the info is very helpful thanks a lot

 

[duneracerweston]

im running +4 LT arms on walle

theres a thread around here on the 400ex swap i wrote a while back..

if your running mx id go +4 or +5 with either +2 or +3 400ex arms. long travel is the ****.

 

[slash]

your front wheels are also offset just flip them , you will have to move the core but thats not a big deal

 

[lbjamm]

Full Flights are good arms too IMO. I agree you need +3 or 4 for MX. Closer to 50 inches the better.