What is needed for more Performance?

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

yuana

Well-Known Member
Joined
Jul 23, 2005
Messages
233
Reaction score
0
Location
Curacao (Netherlands Antilles)
He Guys, ;D

I know that an aftermarket exhaust, pro-filter kit and jetting will help the performance but are there any other products out there? (no big bore kits).
Any cams that will improve the performance or what ever. :cool:
 
carb.. edelbrock? if thats how you spell it.. they ive you a good boost (by wht im told) with the pro flow kit do you have your air box lid off? that will also give you some more power. nitrous!!
 
the pro flo kit you dont HAVE to have it off but it is a lot better

jet kit / headpipe / pistons/ cams/ all that good $#!t
 
powroll or webcam make good camshafts, i have heard mixed reviews of the hotcam though.i dont mind em but thats just my experiance
 
i was reluctant to remove mine because of riding in mud and water a lot. Not only do you risk getting water sucked in, but mud also clogs up a filter real quick. An outerwear should eliminate most of this, but i don't have much trust in a paper-thin piece of nylon screen.
 
I dont know why everyone says headpipe on this board; there are many more things id spend the $180.00 on then a headpipe for the warrior (the stocker does an excellent job).
 
If you don't want to take the motor apart than save the 600 for a wet feed nitrous kit. Wait on the headpipe until you have more mods.
 
Why are the Hotcams not so popular with you guys? Doesn't it give any power at all? I like the mods that you will notice the gains as soon as you start the bike. And after the first test drive you never want to go back to stock!!
 
It's not that they don't give hp gains, it's that you can get a better cam for the same money, and you should get stiffer springs no matter what kind of cam you get anyways. There's more bang for your buck with webcam, powroll, etc.
 
[quote:w2a57aqv]the pro flo kit you dont HAVE to have it off but it is a lot better

jet kit / headpipe / pistons/ cams/ all that good $#!t
why wouldnt you take it off? [/quote:w2a57aqv]

some people dont want to
 
If you don't want to take the motor apart than save the 600 for a wet feed nitrous kit. Wait on the headpipe until you have more mods.

I would not run nitrous with that stock piston, you need at least a forged.
 
Back
Top