.020 over build

[97warrior_rider]

Had to see how it would look

 

[duneracerweston]

Carberator lol the thing that mixes the fuel and air..

 

[97warrior_rider]

Ya I have the fcr

 

[duneracerweston]

Run that on your warrior. 10x better carb and its quite the upgrade

 

[97warrior_rider]

I deff will I haven't been able to locate a coupler for the custom intake mod I need to increase breathing power this stock air filter sucks

 

[97warrior_rider]

Yfz ha ha now the selling and conversion begins

 

[97warrior_rider]

 

[97warrior_rider]

I just got a wild hair and was wondering has anyone ever put a 450 swinger on a warrior I know it needs to be modded to fit

 

[geeessfore]

Ya they did. It had to be shimmed and a new shock mount made because the 450 shock linkage is opposite of warrior. Its on the bottom of swinger

 

[97warrior_rider]

Hmmm ya I have a full 450 plastics pegs heal gaurds rad front end all brakes axle all 4 wheels and tires swing arm shock for rear linkage lights bumpers front and rear all electrical seat you name it it's there but the motor so I'm looking at doing some mods

 

[97warrior_rider]

I don't wanna be a copy cat but the 450 plastics look sick on the warrior

 

[97warrior_rider]

Alright so I'm installing the yfz pro taper bars and the pro taper bar clamps still deciding on thumb throttle conv or stick to twist swapping my front wheels with the black 450s possibly the rears since they have brand new razor rears as well not sure if the rear mounted bumper /plastic mount will fit direct but deff looking into it with 450 led tail light found a conversion factor that will blow some minds when I start the plastic swap.found some other things out about some 450 parts that were interesting

 

[CJCaldie]

cant wait

 

[97warrior_rider]

Cj I know bro I'm stoked to get started if your down might need some help

 

[CJCaldie]

ya man! down to help. down to learn

 

[97warrior_rider]

Well might start tonight if you wanna come up to the house

 

[97warrior_rider]

Well me and Cj figured out the dj kit and mounted the 450 bar clamps and pro taper fatties

 

[CJCaldie]

http://www.ebay.com/itm/Yamaha-Warrior-350-2000-2001-2002-2003-Outer-Tie-Rod-End-NEW-/261291030171?pt=Motors_ATV_Parts_Accessories&hash=item3cd628b69b&vxp=mtr

 

[97warrior_rider]

Is it a lefty though cause I couldn't find the item info in description if it's left or right side

 

[CJCaldie]

i think last night we figured out the outers would be the same and the inners would be the same. the inner and outer just has to be opposite so you can crank on the rod for adjustments. im going to look at mine real quick to verify it but im pretty sure thats the case