Might be getting a 96 Blaster

[88WarriorBoy]

no the engines actually do share the same pistons

 

[YAMAHAULER]

oh and the rear brakes should be replaced with hydrolic brakes too. they SUCK!

I just found that out by pushing down on the foot brake now the rear caliper is stuck oh well she needs to be thawed like the clutch cable now it works great had ice inside.
I think I'll be pulling the rear axle and A-arms and lugging the damn thing down the narrow stairwell to my basement workshop

 

[alex456123]

you can rebuild the rear caliper without any replacement parts and it is pretty easy.

 

[88WarriorBoy]

throw some lithium grease in and around the rear caliper pad and it wont stick and adjustment is key with those

 

[YAMAHAULER]

I think the cable just needs to be thawed
but I'm gonna deffinatly be changing the front spindals out with warrior ones and throwing a pair of yfz450 calipers on the little biatch! then she won't need rear brake

 

[alex456123]

always good to have it! just fix the mechanical rear brake and that will help ya out if anything fails lol

 

[YAMAHAULER]

well I just put a gallon of mixed gas in her and kicked the damn thing over for a good 10 minutes and nada they started the damn thing yesterday before I made the trip up to get it only took about 4 kicks wtf!

 

[Mathius]

It's good to know that there is a vast knowledge of Blasters on here, cause I think I'm gonna get one.

 

[YAMAHAULER]

I'm just glad it's here so I don't have to go to the Blaster forum haha!~
and start from scratch with everybody

 

[alex456123]

well I just put a gallon of mixed gas in her and kicked the damn thing over for a good 10 minutes and nada they started the damn thing yesterday before I made the trip up to get it only took about 4 kicks wtf!

needs a carb cleaning dude.

 

[Mathius]

I think you should pull the carb Hauler, and give it a real good cleaning before try'n to start it again.

 

[alex456123]

yea blasterfourm is full of dicks too. (from my experience)

 

[buzzy613]

you get it fired?

 

[Mathius]

yea blasterfourm is full of dicks too. (from my experience)

I'm on that forum, I went on to BS about big bores. Everybody seemed to be fairly decent.
Most of those guys are on the E2S forum.

 

[alex456123]

i got a big bore lol it was awesome untill i fried it from wrong jetting.

 

[Mathius]

i got a big bore lol it was awesome untill i fried it from wrong jetting.

Actually I meant like 400, and 465 swaps. I was looking for info on 12 volt lighting coils.
I don't know much about the big bore kits like the vito's 240.. I know that their really popular though.

 

[alex456123]

yea it was a 240 swap i think. i will have to check the bore though. it was a huge piston lol

 

[YAMAHAULER]

well carb off and apart everything in the carb was clean has a 230 main jet and a 2.8 pilot bowl was clean just the top throttle body part is well look at the pics

and here is the **** big chunk of ice might be why the cable broke hey?gonna let it thaw over night so nothing gets bent

 

[alex456123]

yea dude that thing looks glazed so it needed a cleaning lol

 

[YAMAHAULER]

so what is the top part of the carb for with the wires going into the throttle housing?