.020 over build

[97warrior_rider]

It's a blast bro unfortunately its not as smooth sailing as it looks lol we were roughing it and the stock suspension on the warrior can't take the abuse we rode today we went all out I finally got to the hour mark were I could let hell out of its cage ha ha I kept up pretty good but still need to change the gearing out ha ha

 

[97warrior_rider]

The 450 yfz was hauling ass through a lot of it but I was hot on his tail till the 400ex stepped up his game and then I trailed the back I was having parking brake kill switch issues bike was shutting off a lot but my buddy Nando from high school on his 450 slung cow pie all over me and the widow

 

[97warrior_rider]

Got mud

 

[97warrior_rider]

Took sparkys advice did a 15/40 gear ratio because I already had those gears on hand didnt lose much torque really but it did pick up on the top end a pretty decent amount

 

[97warrior_rider]

Still gotta fix my shut off problem but pat sent me on a good start

 

[97warrior_rider]

Is there any other way to fix the 660 chain issue other then the link change any opinion welcome

 

[duneracerweston]

link issue refuring to the chain and roller?

 

[97warrior_rider]

Ya

It's got that bad angle and fully extended its even worse

 

[duneracerweston]

amp link, or lowering link.

 

[97warrior_rider]

Lowering link meaning the banshee lowering link? I thought about relocating my rollers on the frame

 

[97warrior_rider]

That amp link is close to 150 so there's no way ill be able to do that I deff like the way it works though

 

[YAMAHAULER]

http://www.ebay.com/itm/180368008707?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

 

[duneracerweston]

yep and yep. lol amp link is on my parts list.

 

[97warrior_rider]

I wish I could afford it cause with my prm skid for the swing arm I almost think it will hit the skid keeping it from going low enough

 

[97warrior_rider]

Thanks Ed I appreciate the link bro I wasn't sure that was the one

 

[97warrior_rider]

And thanks Weston I appreciate all the input and help as well

 

[97warrior_rider]

Ordered the lowering link an block off plate for my bike

 

[geeessfore]

I just ran a banshee chain guide and normal roller with no issue. The lowering link made it way to low and the dogbone would dig into the ruts.

 

[97warrior_rider]

You got a pic bro that I can understand what your talking about

 

[97warrior_rider]

I'm almost thinking it won't work with my prm skid but I got it ordered to give it a try cause I went single rate coil not dual rate