Stroker build

shop deals on amazon
Advertise with us
Shop deals on ebay
Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thanks. I'll try to get a better profile pic of it tomorrow. My damn enternet sucks. I think that my wireless router is taking a ****. I have the computer hooked to the Hughesnet terminal with an ether net cable, lol. Hopefully I'll have some pics tomorrow. I should be able to get the 2nd coat on the frame tomorrow, then I want to do a coat of clear. After that, I need to run a thread chaser through all the bolt holes. I got the stem painted gray today, too.
 
PHANTOMLORD said:
I did the same to my seat and damn near riped it trying to get the cover on it,, im actauly thinking about removing the extra foam in mine,, but yours looks good bro..
Click to expand...


It's all in how you pull and staple em, man. Ofcousre, the thickness of the foam has some to do with it, too. If you didn't use any spray adhesive when you put the added foam in there, It can shift and cause that problem you have.
 
Thanks Scott. I'm really anxious to see how it feels. Feels good by hand, but dying to test it out. Hopefully my ass wont hurt as bad at Hatfield now, lol.
 
Gen1Pat said:
Thanks. I'll try to get a better profile pic of it tomorrow. My damn enternet sucks. I think that my wireless router is taking a ****. I have the computer hooked to the Hughesnet terminal with an ether net cable, lol. Hopefully I'll have some pics tomorrow. I should be able to get the 2nd coat on the frame tomorrow, then I want to do a coat of clear. After that, I need to run a thread chaser through all the bolt holes. I got the stem painted gray today, too.
Click to expand...

Did you try updating the firmware on your router? Could fix yo problem.
 
Dude, you are talking to someone that still prefers looking you parts in a parts book, then using a ******* computer. I have NO clue what the hell you are talking about, and have no idea how the hell to even go about doing it. The router we have is a LINKSYS. Either way, to me, it is time for a new one.
 
Hey tell me what model number it is and ill send you the firmware. All ya need is the disk that came with the router and your laptop with an Ethernet cord. I'll walk ya through it. No use in replacing something I can fix for ya for free!
 
I'll look into doing that tomorrow. I have to find the disc. I just plugged the router back in and seems to be working fine now. I miss the days of MS DOS! lol.
 
Gen1Pat said:
I'll look into doing that tomorrow. I have to find the disc. I just plugged the router back in and seems to be working fine now. I miss the days of MS DOS! lol.
Click to expand...

Lol dude my router goes out all the time like that just unplug it leave it for 10 secs and plug it back in the reset it. I'd still do a firmware update to make it faster and less likely to fail.
 
I've unplugged the damn thing AND the Hughesnet terminal for nearly 24hrs. Not much better.
 
Yeah, usually the old "turn it off and back on again" fixes my problem if it's my router.

It could also be your internet provider taking a **** on you, they might be giving you shitty connection or service. Always a possibility that it could be on their end, not yours.
 
duneracerweston said:
looking good pat! anxious to see it run! i ordered my parts tonight so i should be running this week!
Click to expand...


You and me both! I'm thinking I will have my top end back this week. Mr. Jessup couldn't turn the flywheel, and after talking to him I may not turn it anyway. He brough up a point my friend did. Since this bike spends it's life in the woods, I'll want the stock weight flywheel becuase the engine will jug better. With the lighter flywheel I'll either have to keep the revs up, or work the clutch more. My still have my spare turned, and swap em out at some point, and see how big a difference there is.
 
Wow that's crazy ! I'm gonna put some cash in my 350 but not get crazy like you did ! I maxed out my credit card on my Raptor 700 I don't want to do that again. I just want more power and no show. Very nice though ! Can't wait to see a video !
 
Yeah, I've been looking at them again. Just need some money. SHOULD be getting some soon, I hope. I'm going to make an intake manifold, port matched, for an FCR when I get the head back from Mr. Jessup. Then I just need some silicon tube.
 
Progress from Saturday to today.

Rear tires mounted (already did fronts)
0209031259_zpsb55105ad.jpg


Took rear shock apart and cleaned it best I could
0211031625_zpsc20ea1f8.jpg


Swinger in
0804021749_zps680a008a.jpg


Chain guide and slider on
0211031116_zps582bd279.jpg


Shock and linkage clean and installed. All but carrier has been greased. Had to find a shorter bolt to mount the dog bone link to new swinger.
0211031652_zps33f0de7a.jpg
 
You must log in or register to reply here.

Latest posts

Back
Top