truck, mods and tires

[Gen1Pat]

I like my lifetime warrenty I aso run KYB shocks on my truck. KYB Monomax to be exact. Great shocks, hold up very well to towing abuses, usually have a buy 3 get one free deal, and lifetime warrenty.

Another thing you have to take into consideration with the rockers is if you're valve train can handle the extra lift.

 

[94warpig]

I like the warr too. Just wondered if anyone there was sell selling it. I sell a lot of Monroe shocks

 

[warriorgirl09]

i like Gabriel and bilstein shocks

 

[Gen1Pat]

Bilstein is good stuff. I've been using these loaded struts lately. All new, beats taking them apart for new cartridges. I forget who is making them. Oh, I ONLY use National seals and bearings. Use a **** done of Dorman, too. Great stuff there.

 

[94warpig]

I sell a ton of ready struts national and dorman as well. All good stuff

 

[Gen1Pat]

Complete struts are the shiznit! NGK makes awesome plug wires, too.

 

[94warpig]

I sell s lot of standard wire sets. Ngk makes great wires but they dont sell by me for some reason.

 

[Gen1Pat]

I have to order them off NGK's website. Only use them when I want them. Can't be waiting for them to show for a customers car.

 

[buzzy613]

well heres the think the 1.7 rockers for my 351h does the same exact gain as the comp cams 35-512-8 cam and yes my valve train will hold up, and rockers are about $100 cheaper

 

[94warpig]

Yea that would be a pain to wait! What do ur parts stores stock for wires?

 

[Gen1Pat]

I'd buy the cam personally. What do you have in there now?

 

[Gen1Pat]

I don't even rememeber.

 

[94warpig]

Sorry for all the parts questions. Just good to see what other stores are doing sometimes. You guys dont even have my stores out by you. Thsnks for answering my dumb questions lol

 

[buzzy613]

stock, i had everything recomented to me by ford racing but i plan on doing headers and rockers soon

 

[94warpig]

Why rockers with stock cam?

 

[buzzy613]

the different ratio in the rocker pushes the valve open longer. it would be like buying the cam i listed with stock rockers and blowing $100 bucks more

 

[warriorgirl09]

rockers wont effect the duration as much as lift. duration is mostly what makes your power. still need lift in there too. I'm tellin ya dude you wont notice the rockers much with a stock cam... if you want to wake the engine up there is only one real way to do it and thats put a decent cam in

 

[buzzy613]

any body have recomendations on cams like exact part numbers 96 351h its a roller cam i belive

 

[Mathius]

You can't really go wrong with Comp.. They only make 3 roller cams for the 351 windsor though. http://www.compperformancegroupstor...een=CTGY&Store_Code=CC&Category_Code=351WCams

 

[warriorgirl09]

whatcha lookin to do with it? you want low end grunt and a lopey idle or ya lookin to run races? lol

the 351's are flat tappet cam engines and the roller cams require a retrofit kit to work and a complete roller cam will run about $500

flat tappet will do just fine (i'll be running one in my chevy... sbc cost about $700 to convert to roller)


comp 270h
http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=871&sb=2

or a comp xe262h
http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=877&sb=2